Forest industry

Hard Steel ind. – Forest industry

Product

1. Bulldozer dump blade for the forest industry, nloader bucket blade, nbucket blade scraper

Field of application: bucket or dump blade is a replaceable element of the working body of road construction equipment, designed to extend the service life of the equipment. During operation, it is exposed to abrasive and shock loads and as a result requires periodic replacement. With intensive and extreme use, spare parts are subject to wear. When replacing components for special equipment, it is important to pay attention to the quality of the raw materials from which the knives are made. The production of cutting edges from high-strength, high-quality steel can increase the productivity of the machine.

2. Grapple capture for the forest industry

Field of application: grasping of the grab – the working body of the grab is required to load/unload various types of materials.

3. Grip tip

Field of application: the tip of the grab is attached to the tooth (grab) of the equipment and is the part that wears the most. Tips are made of wear-resistant high-strength steels.

4. Grapple Jaw

Field of application: a set of grapple buckets (grapple jaws) is used for work in difficult conditions. It is possible to manufacture products according to the client’s individual technical task.

5. Rumble screen for the forest industry

Field of application: the sieve is mounted on a boom and performs the function of separating loose materials into fractions.

6. Logger horse

Field of application: cones (stands) are installed on the trailer of a logging truck and serve to reliably fix the transported materials.

7. Leaving

Field of application: the wood chipper is used to transport wood chips. A wear-resistant lead will be able to reduce the forced simple equipment several times. It is possible to manufacture typical solutions, products according to your sketches, drawings or samples.

8. Plug line

Field of application: chip wire is used in the forest industry. Its purpose is to divide the flow of crushed material and increase the degree of chip cleaning.

9. There was a crusher for the forest industry

Field of application: crusher hammer is the working body of hammer crushers, the task of which is the crushing and grinding of various materials.

10. Crusher axle for the forest industry

Field of application: the axis of the hammer crusher is intended for hanging a set of hammers in the rotor of the crusher. It is subject to high alternating loads, therefore it is made of high-strength structural steels.

11. Crusher screen for the forest industry

Sieve of a chopping machine

Sieves are used to separate materials by size of pieces or particles. Types of opening in industrial sieves can be round, square, rectangular, harp-shaped and slotted. Size range from 0.5 to 200 mm. The company’s sieves are characterized by high strength, ease of installation, long service life and affordable cost.

12. Crusher lining for the forest industry

Field of application: lining of the casing of the crusher of dry mixtures is carried out to ensure protection of surfaces from possible damage.

13. Falling roller

Field of application: the feeding roller of the deburring machine is involved in the process of cleaning wood from bark. The debarking machine cleans the wood from the bark with cutters/mills that are fixed on the rotor.

14. Loader loosener rack

Field of application: the racks of the loosener can provide loosening of soils of different densities, as well as the destruction of soils and the separation of rocks from the total volumes.

15. Radial fan housing

Field of application: the casing of the radial fan is subject to high wear and tear, as during operation the casing is affected by abrasive particles and rapid wear and failure occurs.

16. Radial fan blade

Field of application: the fan blade is the working element of the wheel of smoke extractors (fans). A worn shovel leads to a reduction in the efficiency of smoke extractors (fans), so wear-resistant solutions are required during manufacture.

17. Lining of the dump truck body

Field of application: lining the body of a dump truck with wear-resistant materials makes it possible to increase the efficiency of the use of special equipment, reducing the weight of an empty vehicle and increasing the useful load, as well as increasing the operational resource of special equipment.

18. Scraper bucket lining

Application: scraper bucket lining is necessary to absorb the impact of rock or inert materials and ensure maximum bucket life.

19. Chain Sprocket

Field of application: chain drive sprocket is part of the equipment chain transmission. These products are among the most heavily loaded parts of the drive, which are prone to high frictional wear and large alternating loads.

20. Chain guide

Field of application: the chain guide is necessary to protect the equipment body from the influence of the conveyor chain, as well as the direction of movement of the falling chain