Production of cement

Hard Steel ind. – Cement production

Product

1. Grate plate

Field of application: the grate bar is part of the grates, the size of the bars allows you to adjust the fraction of the finished product.

2. Grate plate

Field of application: the grate bar is part of the grates, the size of the bars allows you to adjust the fraction of the finished product.

3. Grate plate

Field of application: the grate bar is part of the grates, the size of the bars allows you to adjust the fraction of the finished product.

4. Grate plate

Field of application: the grate bar is part of the grates, the size of the bars allows you to adjust the fraction of the finished product.

5. Lining of the mixer of dry mixtures

Field of application: lining the mixer of dry mixtures is necessary to ensure protection of surfaces from possible damage.

6. There was a crusher for the production of cement and construction mixes

Crusher hammer for the production of cement and construction mixtures Field of application: crusher hammer is the working body of hammer crushers, the task of which is crushing and grinding of various materials.

7. Crusher axis for the production of cement and construction mixtures

Field of application: the axis of the hammer crusher is intended for hanging a set of hammers in the rotor of the crusher. It is subject to high alternating loads, therefore it is made of high-strength structural steels.

8. Sieve crusher for the production of cement and construction mixtures. Sieve crusher

Sieves are used to separate materials according to the size of pieces or particles. Types of opening in industrial sieves can be round, square, rectangular, harp-shaped and slotted. Size range from 0.5 to 200 mm. Sieves of the WEAR SERVICE company are characterized by high strength, ease of installation, long service life and affordable cost.

9. Interdental protection of the loader

Field of application: the interdental protection is attached to the cutting edge with simple bolt connections. The task of interdental protection is to absorb the impact of rocks or inert materials and ensure maximum preservation of the bucket blade.

10. Loader bucket blade for the production of cement and construction mixes. Excavator bucket blade

Field of application: bucket or dump blade is a replaceable element of the working body of road construction equipment, designed to extend the service life of the equipment. During operation, it is exposed to abrasive and shock loads and as a result requires periodic replacement. With intensive and extreme use, spare parts are subject to wear. When replacing components for special equipment, it is important to pay attention to the quality of the raw materials from which the knives are made. The production of cutting edges from high-strength, high-quality steel can increase the productivity of the machine.

11. Case of a radial fan for the production of cement and construction mixtures.

Field of application: the housing of the radial fan is subject to high wear and tear, as during operation the impact of abrasive particles on the housing occurs and rapid wear and failure occurs.

12. Case of a radial fan for the production of cement and construction mixtures.

Field of application: the housing of the radial fan is subject to high wear and tear, as during operation the impact of abrasive particles on the housing occurs and rapid wear and failure occurs.

13. Impact plate of the rotary crusher. Lining of a rotary crusher

Field of application: the impact plate of the rotary crusher is an element of protection of the casing of the crushing chamber, which is most prone to shock wear. It is made of high-strength wear-resistant steel with a thickness of 40 to 120 mm. Excessive wear of these plates leads to reduced productivity and damage to the crusher body.

14. Separator cone

Field of application: separator cones are installed on a raw material mill. Separator cones are prone to high wear. Installation in equipment allows you to save expensive equipment from long downtimes.

15. Raw material mill wall

Field of application: the walls of the raw material mill provide protection of the equipment against shock loads and wear.

16. Star chain

Field of application: the chain drive sprocket is part of the chain transmission of the equipment. These products are among the most loaded parts of the drive, which are subject to high frictional wear and large alternating loads.

17. Feeder lining

Field of application: feeder lining is made to ensure protection of surfaces from possible damage.

18. Lining of cyclone separator

Field of application: cyclone separator lining is made to protect surfaces from mechanical, chemical, physical and thermal damage

19. Loading tray

Field of application: the loading tray is an element necessary for loading materials into various equipment, the use of loading trays prevents spillage of materials during overloading.