Mining industry

1. Bulldozer dump blade for the mining industry

Loader bucket blade, scraper bucket blade, excavator bucket blade

Field of application: bucket or dump blade is a replaceable element of the working body of road construction equipment, designed to extend the service life of the equipment. During operation, it is exposed to abrasive and shock loads and as a result requires periodic replacement. With intensive and extreme use, spare parts are subject to wear. When replacing components for special equipment, it is important to pay attention to the quality of the raw materials from which the knives are made. The production of cutting edges from high-strength, high-quality steel can increase the productivity of the machine.

2. The rack of the bulldozer loosener for the mining industry. The rack of the loader loosener

Field of application: the bulldozer loosener racks can provide loosening of soils of different densities, as well as soil destruction and separation of rocks from the total volume.

3. Lining plate of the gyratory crusher

Field of application: the lining plate is used to protect the surfaces of the gyratory crusher from mechanical, chemical, physical and thermal damage.

4. Mud pipeline

Scope of application: the sludge pipeline is used as a pipeline, the purpose of which is to transport sludge.

5. Shovel of trough sink for the mining industry. Screw conveyor blade

Field of application: the trough washing shovel is designed to remove dusty, silty and clay particles from rubble, gravel, sand and other materials to improve their consumer properties. The screw conveyor shovel is necessary for moving materials or mixing them.

6. Lining of the trough sink auger. Screw conveyor blade

Field of application: lining of the screw is used to ensure resistance of the screw to mechanical impact and protection against possible damage. Field of application: the screw blade of the screw conveyor is necessary for moving materials or mixing them.

7. There was a crusher for the mining industry

Field of application: crusher hammer is the working body of hammer crushers, the task of which is the crushing and grinding of various materials.

8. Crusher axle for the mining industry

Field of application: the axis of the hammer crusher is intended for hanging a set of hammers in the rotor of the crusher. It is subject to high alternating loads, therefore it is made of high-strength structural steels.

9. Screen crusher for the mining industry

Sieves are used to separate materials according to the size of pieces or particles. Types of opening in industrial sieves can be round, square, rectangular, harp-shaped and slotted. Size range from 0.5 to 200 mm. Sieves of HARD STEEL INDUSTRY company are characterized by high strength, ease of installation, long service life and affordable cost.

10. Lining of a crusher for the mining industry

Field of application: lining of the casing of the crusher of dry mixtures is carried out to ensure protection of surfaces from possible damage.

11. Side cutter of a loader bucket for the mining industry

Field of application: side cutters (angle teeth) are attached to the side walls of the bucket with bolts and serve to protect the walls of the bucket. Side cutters also prevent the bucket from getting stuck in the trench by cutting the soil slightly wider than the bucket.

12. Interdental protection of the loader bucket of the mining industry

Field of application: the interdental protection is attached to the cutting edge with simple bolt connections. The task of interdental protection is to absorb the impact of rocks or inert materials and ensure maximum preservation of the bucket blade.

13. Impact plate of the rotary crusher. Lining of a rotary crusher.

Field of application: the impact plate of the rotary crusher is an element of protection of the casing of the crushing chamber, which is most prone to shock wear. It is made of high-strength wear-resistant steel with a thickness of 40 to 120 mm. Excessive wear of these plates leads to reduced productivity and damage to the crusher body.

14. Lining of the dump truck body for the mining industry

 Field of application: lining the body of a dump truck with wear-resistant materials allows to increase the efficiency of the use of special equipment, reducing the mass of empty transport and increasing the useful loading and operational resource of the special equipment. the plane from which the knives are made. The production of cutting edges from high-strength, high-quality steel can increase the productivity of the machine.

15. Lining scraper bucket

Scope of application: scraper bucket lining is necessary to absorb the impact of rock or inert materials and ensure maximum life of the bucket.

16. Screen sieve

Field of application: the sieve is installed on a boom and performs the function of separating loose materials into fractions.

17. Chain star

Field of application: the chain drive sprocket is part of the chain transmission of the equipment. These products are among the most loaded parts of the drive, which are subject to high frictional wear and large alternating loads.

18. Transport line tray. Screw conveyor tray

Field of application: chute (tray) – part of the transportation line along which materials are moved with the help of screws.

19. Chain guide

Scope of application: the chain guide is necessary to protect the equipment body from the influence of the conveyor chain, as well as the direction of movement of the feeding chain.

20. Feeder lining

Field of application: feeder lining is made to ensure protection of surfaces from possible damage.