ENG
UA
General description of products
C-Cr-V-W- alloyed powder wire for surfacing tools made of the same type of hot-melting steel or for surfacing the working surfaces of hot-working tools made of low-alloy steels. The deposited metal can still be machined. Heat treatment is possible, hardness remains up to 550°C.
Classification
Application
Correct weld metal analysis (%)
| C | si | Mn | kp | Pn | В |
| 0,3 | 0,6 | 0,4 | 3.0 | 0,6 | 4.5 |
Typical mechanical properties of all welded metals
Hardness after welding: 48 – 52 HRc
Parameter
| measurement | volt | amplifier |
| 1.2 | 20-24 | 150-200 |
| 1.6 | 22-26 | 180-240 |
| 2.0 | 25-27 | 220-260 |
| 2.4 | 25-27 | 260-300 |
| 2.8 | 26-28 | 260-340 |
Delivery form
| «BS 300» = 15 kg | «BS 450» = 25 kg | winding drum = 300 kg |
CORODUR may change the characteristics of the wire without notice. Information about the nature and use serves to inform the user. Information on mechanical properties always refers to pure weld metal according to current standards. We recommend that users test our products at their own risk.
Information guide