ENG
UA
General description of products
Champak Industries is a specialized supplier and exporter of FORA 400, FORA 450 and FORA 500 Wear Resistant Steel Sheet. Wear Resistant Steel – Fora 400 is mainly used in abrasive conditions. It is a water-saturated martensitic steel with an excellent hardness of 400 HB. Due to its increased rigidity, strength and high yield strength, this steel is used where low wear resistance is required. Compared to conventional steels, Fora 400 provides real advantages for equipment and allows a significant reduction in thickness. In addition, Fora 400 is 3 times more wear-resistant than S355 steel. The offered steel is easily welded and is the best for agricultural work
Wear-resistant steel – Fora 400 is mainly used in abrasive conditions. It is a water-saturated martensitic steel with an excellent hardness of 400 HB. Due to its increased rigidity, strength and high yield strength, this steel is used where low wear resistance is required. Compared to conventional steels, Fora 400 provides real advantages for equipment and allows a significant reduction in thickness. In addition, Fora 400 is 3 times more resistant to moisture than S355 steel. The offered steel is easily welded and is the best for agricultural work.
Features and Add-ons
Features
• Dimensional accuracy
• Strong construction
• Durability
• High tensile strength • Durability
to wear and corrosion
• Does not require maintenance
Appendices
This steel is particularly suitable for use in:
• quarries, construction and earthmoving equipment
• cement factories
• mining industry
• metallurgical industry
• quarries, construction and earthmoving equipment
• cement factories
• mining industry
• metallurgical industry
Mechanical properties and chemical analysis
Mechanical properties
| Hardness | Yield limit | UTS | E 5,65 vS ? (%) | KCV Transv. – 20 (F) | KCV Transv. – 40 (F) |
| 400HB | 1100 Н/мм | 1350 Н/мм | 13 | 35 Дж/см (t=15 мм) 65 Дж/см (t= 5 мм) |
20 Дж/см (t=15 мм) 45 Дж/см (t= 5 мм) |
| 42,5 HRC | 160 Ksi | 195 Ksi | 13 | 21ft.lbs(t=15mm) 38ft.lbs(t=5mm) |
12 ft. lbs (t=15 мм) 27 ft. lbs (t= 5 мм) |
Chemical analysis
| C | Мн | П | С | кр | Ni | пн | Б |
| 0,20 | 1.4 | 0,02 | 0,003 | 1.0 | 0,5 | 0,2 | 0,003 |