Asphalt production

Hard Steel ind. – Asphalt production

Product

1. Bulldozer dump blade for asphalt production

Field of application: bucket or dump blade is a replaceable element of the working body of road construction equipment, designed to extend the service life of the equipment. During operation, it is exposed to abrasive and shock loads and as a result requires periodic replacement. With intensive and extreme use, spare parts are subject to wear. When replacing components for special equipment, it is important to pay attention to the quality of the raw materials from which the knives are made. The production of cutting edges from high-strength, high-quality steel can increase the productivity of the machine.

2. Radial fan housing for asphalt production

Field of application: the housing of the radial fan is subject to high wear and tear, as during operation the impact of abrasive particles on the housing occurs and rapid wear and failure occurs.

3. Radial fan blade for asphalt production

Field of application: the fan blade is the working element of the wheel of smoke extractors (fans). A worn shovel leads to a reduction in the efficiency of smoke extractors (fans), so wear-resistant solutions are required during manufacture.

4. Mixer armor

Field of application: the armor of the mixer provides protection of the surface of the equipment against possible damage and wear.

5. Mixer ring

Field of application: rings (shaft protection) are necessary to protect the bearings of a two-shaft mixer from the ingress of materials to be mixed, thus the use of rings increases the service life of the mixer.

6. Mixer blade

Field of application: mixer blades are an integral part of the equipment and are intended for mixing the mixture.

7. Mixer lever

Field of application: the levers of the mixer are bolted to the shaft of the mixing equipment and serve to fasten the mixer blades. Levers work in an abrasive environment, so they also require wear protection.

8. Lining of the unloader cone

Field of application: lining of the unloader cone is carried out to ensure protection of surfaces from various types of damage.

9. Bunker mixing tower

Field of application: the hopper of the mixing tower is a container that allows you to store materials and mix them before transportation.

10. Sieve of the mixing tower

Field of application: the sieve is installed on the boom and performs the function of separating loose materials into fractions.

11. Lining of the mixing tower

Field of application: lining of the mixing tower is carried out to ensure protection of surfaces from mechanical, chemical, physical and thermal damage.

12. Dispenser slide

Field of application: dispenser shutters – necessary unloading of hoppers from loose materials. They are prone to intense frictional wear, therefore, to increase the service life, the use of wear-resistant and high-strength steels is required.

13. Ladle of the drying drum

Field of application: the ladle of the drying drum is an element necessary for mixing raw materials inside the drum and increasing the efficiency of the equipment.

14. Roller drive of the drying drum

Scope of application: The drying drum support roller is used to transmit the torque from the motor to the drying drum. This is a highly loaded element that is subject to frictional wear, so the surface of the roller must be protected by wear-resistant materials.

15. Lining of the drying drum

Field of application: lining of the drying drum is carried out to ensure protection of surfaces from mechanical, chemical, physical and thermal damage.

16. Star chain

Field of application: the chain drive sprocket is part of the chain transmission of the equipment. These products are among the most loaded parts of the drive, which are subject to high frictional wear and large alternating loads.

17. Chain link

Field of application: Chain links are the main elements of conveyor systems. Depending on the tasks and industry, working bodies (buckets, traverses) that perform the transporting function are attached to the links.

18. Elevator bucket

Field of application: elevator buckets are designed for flow transportation and rapid unloading of lumpy or loose materials. The type of bucket for the elevator must be selected based on the characteristics of the cargo being moved.

19. Elevator chain guide

Scope of application: the elevator chain guide is necessary to protect the equipment body from the influence of the conveyor chain, as well as the direction of movement of the feeding chain.