Concrete Product Manufacturing Hard Steel

Hard Steel ind. – Production of concrete products

Product

1. Side lining of concrete mixer

Field of application: the side lining of the concrete mixer is necessary to ensure the protection of surfaces from possible damage.

2. Concrete mixer shovel. Mixer blade

Field of application: the blades of the concrete mixer are part of the equipment, are attached to the levers and are intended for mixing the concrete mixture. Field of application: mixer blades are an integral part of the equipment and are intended for mixing the mixture.

3. Concrete mixer tray

Field of application: the tray of the concrete mixer is used to transport concrete and reduce material spillage. The length of the product can be from 1.5 to 2 meters.

4. Concrete mixer wall

Field of application: the wall of the concrete mixer is made to protect surfaces from possible damage.

5. Bunker lining

Field of application: bunker lining is made to protect surfaces from mechanical, chemical, physical and thermal damage.

6. Directional vibrating table

Field of application: the guides of the vibrating table are necessary to protect the body of the vibropress from intensive wear by friction.

7. Vibropress punch

Field of application: punches of the vibropress are used for the production of paving slabs. During operation, the edges of the punches wear out quickly, therefore, to increase the service life of the products, it is recommended to make them from durable, wear-resistant raw materials.

8. Vibropress table

Field of application: the vibropress table is an element of the construction of the vibropress, which is necessary for the vibropressing of paving slabs. I make high quality requirements for this element, because it directly affects the quality of finished products and the economy of the enterprise.

9. Shovel trough washing for the production of concrete and paving slabs

Field of application: the trough washing shovel is designed to remove dusty, silty and clay particles from crushed stone, gravel, sand and other materials to improve their consumer properties.

10. Screw lining. Screw conveyor blade

Field of application: the lining of the screw is used to ensure their resistance to mechanical impact and protection against possible damage. Field of application: the screw blade of the screw conveyor is necessary for moving materials or mixing them.

11. Interdental protection of the loader bucket for the production of concrete and paving slabs

Field of application: the interdental protection is attached to the cutting edge with simple bolt connections. The task of interdental protection is to absorb the impact of rocks or inert materials and ensure maximum preservation of the bucket blade.

12. Loader bucket blade for the production of concrete and paving slabs. Scraper bucket knife

Field of application: bucket or dump blade is a replaceable element of the working body of road construction equipment, designed to extend the service life of the equipment. During operation, it is exposed to abrasive and shock loads and as a result requires periodic replacement. With intensive and extreme use, spare parts are subject to wear. When replacing components for special equipment, it is important to pay attention to the quality of the raw materials from which the knives are made. The production of cutting edges from high-strength, high-quality steel can increase the productivity of the machine.

13. Loader loosener stand

Field of application: racks of the loosener can provide loosening of soils of different densities, as well as destruction of soils and separation of rocks from the total volumes.

14. Mixer armor

Field of application: the armor of the mixer provides protection of the surface of the equipment against possible damage and wear.

15. Mixer ring

Field of application: rings (shaft protection) are necessary to protect the bearings of a two-shaft mixer from the ingress of materials to be mixed, thus the use of rings increases the service life of the mixer.

16. Mixer lever

Field of application: the levers of the mixer are bolted to the shaft of the mixing equipment and serve to fasten the mixer blades. Levers work in an abrasive environment, so they also require wear protection.

17. Lining of the unloader cone

Field of application: lining of the unloader cone is carried out to ensure protection of surfaces from various types of damage.

18. Screw conveyor tray

Field of application: chute (tray) – a part of the screw conveyor through which materials are moved with the help of screws.

19. Chain link

Field of application: Chain links are the main elements of conveyor systems. Depending on the tasks and industry, working bodies (buckets, traverses) are attached to the links, which perform

20. Elevator bucket

Field of application: the bucket of the elevator is designed for flow transportation and quick unloading of lumpy or loose materials. The type of bucket for the elevator must be selected based on the characteristics of the cargo being moved.

21. Elevator chain guide

Scope of application: the elevator chain guide is necessary to protect the equipment body from the influence of the conveyor chain, as well as the direction of movement of the feeding chain.