ENG
UA
Strenx® 960MC
Structural high-strength steel at 960 MPa
Strenx® 960MC is a hot-rolled structural steel manufactured for cold forming with a minimum yield strength of 960 MPa.
Strenx ® 960MC meets and exceeds the requirements of S960MC in EN 10149-2. These cut-to-length sheets feature excellent thickness accuracy and surface quality in relation to the strength level, providing outstanding finish to the end products.
Typical applications include advanced lifting devices such as mobile cranes as well as light transport solutions and components.
Size range
Strenx ® 960MC is available in cut form with a milled edge 3.00-10.00 mm thick, up to 1600 mm wide and up to 13 meters long.
Strenx® 700MC D/E
| APPLICATION | DIMENSIONS | STANDARDS |
| Wear resistant |
T: 3 – 10 mm W: до 1600 мм L: до 13000 мм |
EN 10051 EN 10163-2 EN 10149-2 |
Mechanical properties
Mechanical properties
| Thickness (mm) | Yield strength R eH 1)(MPa min) | Tensile strength R m(MPa) | Extension A 5(min %) | Min. inner bend radius for a 90° bend 2) |
| 3 – 10 | 960 | 980-1250 | 7 | 3,5 xt |
Mechanical properties are tested in the longitudinal direction.
1) If ReH is not applied, then Rp 0.2 is used.
2) For both longitudinal and transverse direction.
Indicators of impact viscosity
| Test Direction | Minimum impact energy for test samples Sharpie V 10×10 mm |
| Longitudinal | 27 J/ -40 o C |
Impact test according to EN 10149-2 (-20 °C / minimum 40 J) is available if specified at the time of order.
The impact test according to EN ISO 148-1 is performed on a thickness ≥ 5 mm. The specified minimum value corresponds to a full-sized instance.
Chemical composition
Chemical composition (melting analysis)
|
C *) (max %) |
Si *) (max %) |
Mn *) (max %) |
P (max %) |
C (max.%) |
| 0.12 | 0.25 | 1.30 | 0.020 | 0.010 |
|
Al tot (хв %) |
Nb 2) (max. %) |
V 2) (max. %) |
Ti 2) (max. %) |
| 0.015 | 0.05 | 0.05 | 0.07 |
Refined steel.
1) Sum Nb, V і Ti = макс. 0,18%
Carbon equivalent (CET/CEV)
| Thickness (mm) | 3.00 – 7.99 | 8.00 – 10.00 |
| Type. | 0,28 (0,51) | 0,30 (0,57)) |
Tolerances
Thickness
Tolerances as per Strenx ® thickness guarantee.
Strenx ® guarantees significantly tighter thickness tolerances compared to EN 10 051.
Length and width
Width and length tolerances as per SSAB standard.
The SSAB standard offers smaller width and length tolerances compared to EN 10 051.
Length tolerances apply only to sheets cut to the required length.
Form
Tolerances according to EN 10 051.
Tighter tolerances in accordance with the SSAB standard are available on request.
Flatness
Tolerances according to Strenx® Flatness Guarantees Class A.
Strenx ® Flatness Guarantees offer tighter tolerances compared to EN 10 051.
Flatness guarantees apply only to sheets cut to the required length.
Surface Properties
Materials for download
Download materials
| Strenx® Machining Guidelines | RU | ENG |
| Steel of new possibilities | RU | ENG |
| My Inner Strenx® – Affiliate Program | RU | ENG |
| Strenx® 700MC Plus is a big plus for you and your customers | ENG | |
| Trailer Design Guide, Strenx® | < i class=”fa fa-download”> RU | < i class=”fa fa-download”> ENG |
| Strenx® Hollow Profiles | ENG | |
| Strenx® 700MC Steel Product Grade” | RU | ENG |
| Strenx® 700 steel product grade | ENG | < i class=”fa fa-download”> RU |
| Strenx® 600MC steel product grade | RU | ENG |
| Strenx® 650MC steel product grade | RU | ENG |
| Strenx® 1300 E/F Dimensional Program | ENG | |
| Strenx® 900 steel product grade | RU | ENG |
| Strenx® P700 dimensional program | < i class=”fa fa-download”> ENG | |
| Strenx® 110 XF Dimensional Program | ENG | |
| Strenx® 100 XF dimensional program | ENG | |
| Strenx® 960MC steel product grade | RU | ENG |
| Strenx® 960 E/F Dimensional Program | RU | ENG |
| Strenx® 1100 E/F Dimensional Program | ENG | |
| Strenx® 900MC Steel Product Grade | < i class=”fa fa-download”> RU | ENG |
| Hardox®, Strenx®, Toolox® and Armox® welding consumables | ENG | |
| Strenx® 1100 CR/MC Dimension Program | < i class=”fa fa-download”> ENG | |
| Strenx® Tubing for Agricultural Sprayers | < i class=”fa fa-download”> RU | < i class=”fa fa-download”> ENG |
| Strenx® 700 | < i class=”fa fa-download”> RU | < i class=”fa fa-download”> ENG |
| Strenx® 960 for a stronger and safer rear anti-roll bar | ENG | |
| Strenx® Tubes Brochure | ENG | |
| Strenx® Warranties | RU | ENG |
| Strenx® Welding | RU | ENG |
| Static strength in Strenx® brand joints | ENG | |
| Tech Support #46: Magnetic Arc Strike” | ENG | |
| High strength weathering steel | ENG | |
| Hardox®/Strenx®/Toolox® metric product range | RU | ENG |
| Hardox®/Strenx®/Toolox® imperial product range | ENG | |
| Thermal cutting of Hardox® and Strenx® | RU | ENG |
| Bending of high strength steel – Strenx®, Hardox® | RU | ENG |
Hardox®, Armox®, Ramor®, Strenx®, Toolox®, Domex®, Duroxite® and SSAB Boron are registered trademarks of SSAB. Hard Steel Industry is an independent supplier of steel in these grades and is not an official SSAB dealer.