ENG
UA
Strenx® 1300
Ultra high strength steel at 1300 MPa
Strenx® 1300 is an ultra-high-strength structural steel with a minimum yield strength of 1300 MPa.
Typical applications include load-bearing structures that place very high demands on low weight. SSAB developed Strenx® 1300 to create the lightest steel solutions or to provide an alternative to other materials.
Benefits of Strenx® 1300 include:
- Good weldability with excellent strength and toughness in HAZ
- Exceptional consistency inside the plate is guaranteed by small tolerances
- High impact toughness, providing good tear resistance
- Excellent bending and surface quality
What is high-strength structural steel
SSAB’s expertise helps crane manufacturers design cranes that can handle the load
Size range
Strenx® 1300 E/F is available in 4.0 – 15.0 mm thick plates. Strenx® 1300 E/F is available in widths up to 2900mm and lengths up to 14630mm depending on thickness. More detailed information about the dimensions is given in the program of dimensions..
Strenx® 700MC D/E
| USED FOR | DIMENSIONS | STANDARDS |
|
Structural Low temperatures (up to -60°) |
T: 4 – 15 mm W: up to 2900 mm L: до 14630 мм |
EN 10029 EN 10163-2 |
Mechanical properties
Mechanical properties
For transverse samples.
Thickness (mm)
Yield strength Rp0.2(MPa min)
Tensile strength R m(MPa)
Extension A 5(min %)
4,0 – 15,0
1300
1400 – 1700
8
Indicators of impact viscosity
| Rating | Minimum impact energy for test samples Sharpie V 10×10 mm |
| Strenx® 1300 E | 27 J/ – 400C |
| Longitudinal | 27 J/ – 60 0 C |
1) For thicknesses between 6 and 11.9 mm, undersized V-shaped Sharpie samples are used. Then the specified minimum value is proportional to the cross-sectional area of the sample compared to the full-size sample (10 x 10 mm).
Chemical composition
Chemical composition (melting analysis)
|
Cr *) (max %) |
Su *) (max %) |
Hi *) (max %) |
Пн (max %) |
Б (max.%) |
| 0.80 | 0.30 | 3.0 | 0.70 | 0.005 |
|
Al tot (хв %) |
Nb 2) (max. %) |
V 2) (макс. %) |
Ti 2) (max. %) |
| 0.015 | 0.05 | 0.05 | 0.07 |
Refined steel. * ) Intentional alloying elements.
Carbon equivalent (CET/CEV)
| Thickness (mm) | 4,0 – 15,0 |
| 1300 E CET (CEV) | 0,43 (0,67) |
| 1300 F CET (CEV) | 0,43 (0,67) |
Tolerances
Thickness
Tolerances as per Strenx ® thickness guarantee. Strenx® Guarantees meets the requirements of EN 10 029 Class A,
but offers tighter tolerances.
Length and width
According to SSAB size program. Tolerances comply with the EN 10 029 standard.
Form
SSAB offers tolerances according to EN 10 029.
Flatness
Tolerances according to Strenx® Flatness Guarantee Class D, which are narrower than EN 10 029 Class N.
Surface Properties
According to EN 10 163-2 class A, subclass 3.
Bending
Tolerances according to Strenx ® D bending warranty class.
Materials for download
Download materials
| Strenx® Machining Guidelines | RU | ENG |
| Steel of new possibilities | RU | ENG |
| My Inner Strenx® – Affiliate Program | RU | ENG |
| Strenx® 700MC Plus is a big plus for you and your customers | ENG | |
| Trailer Design Guide, Strenx® | < i class="fa fa-download"> RU | < i class="fa fa-download"> ENG |
| Strenx® Hollow Profiles | ENG | |
| Strenx® 700MC Steel Product Grade” | RU | ENG |
| Strenx® 700 steel product grade | ENG | < i class="fa fa-download"> RU |
| Strenx® 600MC steel product grade | RU | ENG |
| Strenx® 650MC steel product grade | RU | ENG |
| Strenx® 1300 E/F Dimensional Program | ENG | |
| Strenx® 900 steel product grade | RU | ENG |
| Strenx® P700 dimensional program | < i class="fa fa-download"> ENG | |
| Strenx® 110 XF Dimensional Program | ENG | |
| Strenx® 100 XF dimensional program | ENG | |
| Strenx® 960MC steel product grade | RU | ENG |
| Strenx® 960 E/F Dimensional Program | RU | ENG |
| Strenx® 1100 E/F Dimensional Program | ENG | |
| Strenx® 900MC Steel Product Grade | < i class="fa fa-download"> RU | ENG |
| Hardox®, Strenx®, Toolox® and Armox® welding consumables | ENG | |
| Strenx® 1100 CR/MC Dimension Program | < i class="fa fa-download"> ENG | |
| Strenx® Tubing for Agricultural Sprayers | < i class="fa fa-download"> RU | < i class="fa fa-download"> ENG |
| Strenx® 700 | < i class="fa fa-download"> RU | < i class="fa fa-download"> ENG |
| Strenx® 960 for a stronger and safer rear anti-roll bar | ENG | |
| Strenx® Tubes Brochure | ENG | |
| Strenx® Warranties | RU | ENG |
| Strenx® Welding | RU | ENG |
| Static strength in Strenx® | ENG | |
| Tech Support #46: Magnetic Arc Strike” | ENG | |
| High strength weathering steel | ENG | |
| Hardox®/Strenx®/Toolox® metric product range | RU | ENG |
| Hardox®/Strenx®/Toolox® imperial product range | ENG | |
| Thermal cutting of Hardox® and Strenx® | RU | ENG |
| Bending of high strength steel – Strenx®, Hardox® | RU | ENG |
Hardox®, Armox®, Ramor®, Strenx®, Toolox®, Domex®, Duroxite® and SSAB Boron are registered trademarks of SSAB. Hard Steel Industry is an independent supplier of steel in these grades and is not an official SSAB dealer.