ENG
UA
General description of products
When there is no obstacle between a person and a bullet fired at him, except for a sheet of steel, it is very important that the steel is of good quality. Each project of ballistic protection, a new car, modification of armor or other elements, represents a unique set of requirements, especially in the use of high-quality materials for its implementation.
The creation of the latest technologies of military equipment and design methods poses challenges to car designers, ballistic experts and
materials technologists in creating innovative solutions that meet various expectations in terms of weight reduction and ballistic hardness. When analyzing the specific advantages and characteristic qualities of ballistic materials, the cost-effectiveness of the project concept is also very important.
Swebor R&D focuses on producing shielding steel that bends and welds better without compromising on shielding performance. Swebor Armor™ is available in seven different grades based on hardness and other properties.
Branches of industry
A place for each type of Swebor Armor™
For an optimal balance between weight, shape and protective capability, an armored vehicle (for example) may contain more than one type of protective steel.
A building, like an embassy, may not require special formation, so you can forego more convenient armor in favor of less expensive standard ballistic protection.
Why Swebor Armor™?
- Large inventory for fast and reliable delivery
- All warehouse material is checked and certified
- Only strip plates with a thickness of 2 – 16 mm
- Laser surface without additional primer
- Narrow thickness tolerances according to EN 10051
- High flatness
- Good weldability
- ISO certified production
- More than 35 years of experience in the production of special steels – also as a partner for premium brands of well-known steel mills
Product
Depending on the chemical composition and qualities, armored sheets have high resistance to ballistic penetration, as well as resistance to detonation of explosives. The material is an ideal solution for the manufacture of armored cars, reservation of embassy buildings, banks, shelters, shooting ranges, security doors, cash points. Also, wear-resistant Swebor steel is the best material for manufacturing parts used in the mining industry.
| Trade name | Hardness (HV) | Optimal use | |||||
| SWEBOR ARMOR 500 | 480 – 540 | Light and medium armored car designs, body armor, special cars, armored doors, window frames, heavy industry equipment | |||||
| SWEBOR ARMOR 560 | 540 – 600 | Armored bodies, steel body parts for all vehicles. Application in the upper layer of ballistic shields | |||||
MECHANICAL QUALITIES
| Trade name | Hardness (HB) (average) | Mechanical properties EN 16002-2004 Min | Impact strength EN 10045-1:1904 KV(-40°C) min (J) | ||
| SWEBOR ARMOR 500 | 510 | Rm(Мпа) 1500 | Rp0,2 1350 | AS(%) 8.0 | 20 |
| SWEBOR ARMOR 560 | 570 | 1800 | 1600 | 6.5 | 15 |
CHEMICAL COMPOSITION
| Chemical composition (melting analysis), % (max value) | |||||||
| Trade name | С | Si | Mn | P | S | S+P | Others |
| SWEBOR ARMOR 500 | 0.32 | 0.60 | 1.60 | 0.020 | 0.010 | 0.025 | Cr і B |
| SWEBOR ARMOR 560 | 0.36 | 0.60 | 1.60 | 0.020 | 0.010 | 0.025 | Cr і B |
SIZE RANGE
Bronestal Swebor 500/560 is available in a range of sizes,
specified in the table below, in a rolled state with an uncut edge.
| Variety | Thickness, mm | Width, mm | Length, mm | Usual warehouse dimensions, mm |
| SWEBOR 500 / 560 | 2.00 – 2.49 | 1000 – 1150* | 1500 – 7000 | 1000 х 3000 |
| 2.50 – 2.99 | 1000 – 1300* | 1500 – 4000 | 1000 х 3000 | |
| 3.00 – 6.50 | 1000 – 1550 | 1500 – 4000 | 1000 х 3000 | |
| 7.00 – 16.0 | 1000 – 1550 | 1500 – 6100 | 1000 х 3000 |
Possible width * 1500 mm. Discussion is needed.
Width tolerance 0 + 20 mm flatness.
The guaranteed maximum deviation from flatness is 6.0 mm / m.
Latest news – SWEBOR™
Hard Steel ind.