Armox Advance

MainArmox Advance

Armox Advance

Go to order or inquire
ORDER A CONSULTATIONGET THE FULL PRICE LIST

Specifications Armox Advance

Version ENG
General description of productsMechanical propertiesChemical composition (bucket analysis)Tolerances

General description of products Armox Advance

SSAB’s strongest ultra-hard guard plate.

Armox® Advance is SSAB’s strongest application (addition) protection plate for use where component weight reduction is important. It is available in thicknesses from 4.0 to 7.9 mm and is not intended for further heat treatment.

Mechanical properties Armox Advance

THICKNESS
(mm )		 HARDNESS
(HRC )
4.0 – 7.9 58 – 63

Mechanical tests

Rockwell hardness test EN ISO 6508-1. Each treatment is individual.

 

Ultrasonic control

According to EN ISO 10 160, class E3 S3

Chemical composition (bucket sample) Armox Advance

C *)
(МАКС. % )		 SI *)
(МАКС. % )		 MN *)
(МАКС. % )		 P
(МАКС. % )		 S
(МАКС. % )		 CR *)
(МАКС. % )		 NI *)
(МАКС. % )		 МО *)
(МАКС. % )		 B *)
(МАКС. % )
0,47 0,70 1,00 0,010 0,003 1.5 3.0 0,70 0,005

Grained steel. * ) Intentional alloying elements.

Tolerances Armox Advance

More detailed information can be found in SSAB’s Armox® Guarantees brochure or at www.ssab.com.

Open

Thickness

THICKNESS
(mm )		 ADMISSION
(mm )
4.0 – 7.9 – 0.0 / + 0.6< /span>

Length and width

According to SSAB size program.

  • Tolerances conform to EN 10029 or SSAB standard upon agreement.
  • Tolerances on the dimensions of a sheet with a milled edge according to a special agreement.

Form

Tolerances according to EN 10029.

Flatness

Tolerances according to Armox® flatness guarantees which are more restrictive than EN 10029 Class N (L type steel).

Surface quality

According to EN 10163-2, class B, subclass 3.

Go to Armox
Go to order

Hardox®, Armox®, Ramor®, Strenx®, Toolox®, Domex®, Duroxite® and SSAB Boron are registered trademarks of SSAB. Hard Steel Industry is an independent supplier of steel in these grades and is not an official SSAB dealer.