Cold rolled

Domex® 220LADomex® 260LADomex® 280LADomex® 300LADomex® 340LADomex® 350LADomex® 380LADomex® 420LADomex® 460LADomex® 500LA

SSAB Domex® 220LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 220LA is a high-strength, low-alloy steel designed for general pressing, bending and forming applications. SSAB Domex 220LA has consistent properties that facilitate today’s fast production methods.

Size range

SSAB Domex 220LA is available in thicknesses of 0.40-3.00 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 80
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 1)
220 – 290 330 – 400 30 0,0

Mechanical properties are checked in the transverse direction.
Bending properties in both the longitudinal and transverse directions.

1) t = sheet thickness.

Chemical composition (bucket sample)

C
(Max. % )		 SI
(Max. % )		 MN
(Max. % )		 P
(Max. % )		 S
(Max. % )		 AL
(Min. % )		 NB+TI
(Max. % )
0,10 0,040 0,90 0,030 0,025 0,015 0,10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances to EN 10131. Tighter tolerances available on request

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety measures must be taken when bending, welding, cutting, grinding or other work with products

SSAB Domex® 260LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 260LA is a high strength low alloy steel designed for general pressing, bending and forming. SSAB Domex 260LA has consistent properties that facilitate today’s fast production methods.

Size range

SSAB Domex 260LA is available in thicknesses of 0.40-3.00 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 801)
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 2)
260 – 330 350 – 430 26 0,0

Mechanical properties are checked in the transverse direction.
Bending properties in both the longitudinal and transverse directions.

1) If the thickness is less than or equal to 0.7 mm, the minimum elongation value is reduced by 2 units.

2) t = sheet thickness.

Chemical composition (bucket sample)

C
(Max. % )		 SI
(Max. % )		 MN
(Max. % )		 P
(Max. % )		 S
(Max. % )		 AL
(Min. % )		 NB+TI
(Max. % )
0,10 0,040 0,90 0,030 0,025 0,015 0,10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance with EN 10131. Tighter tolerances are available on request.

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety precautions must be taken when bending, welding, cutting, grinding or other work with products.

SSAB Domex® 280LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 280LA is a high strength low alloy steel designed for general pressing, bending and forming. SSAB Domex 280LA has consistent properties that facilitate today’s fast production methods.

Size range

SSAB Domex 280LA is available in thicknesses of 0.40-3.00 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 80
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 1)
280 – 350 370 – 450 26 0,0

Mechanical properties are checked in the transverse direction.
Bending properties in both the longitudinal and transverse directions.

1) t = sheet thickness.

Chemical composition (bucket sample)

C
(Max. % )		 SI
(Max. % )		 MN
(Max. % )		 P
(Max. % )		 S
(Max. % )		 AL
(Min. % )		 NB+TI
(Max. % )
0,10 0,040 0,90 0,030 0,025 0,015 0,10

 

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance with EN 10131. Tighter tolerances are available on request.

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety precautions must be taken when bending, welding, cutting, grinding or other work with products.

SSAB Domex® 300LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 300LA is a high strength low alloy steel designed for general pressing, bending and forming. SSAB Domex 300LA has consistent properties that support today’s fast manufacturing methods.

Size range

SSAB Domex 300LA is available in thicknesses of 0.40-3.00 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 801)
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 2)
300 – 380 380 – 480 23 0,0
0

 

Mechanical properties are checked in the transverse direction.
Bending properties in both the longitudinal and transverse directions.

1) If the thickness is less than or equal to 0.7 mm, the minimum elongation value is reduced by 2 units.

2) t = sheet thickness.

Chemical composition (bucket sample)

C
(Max. % )		 SI
(Max. % )		 MN
(Max. % )		 P
(Max. % )		 S
(Max. % )		 AL
(Min. % )		 NB+TI
(Max. % )
0,10 0,040 0,90 0,030 0,025 0,015 0,10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance with EN 10131. Tighter tolerances are available on request.

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety precautions must be taken when bending, welding, cutting, grinding or other work with products.

SSAB Domex® 340LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 340LA is a high strength low alloy steel designed for general pressing, bending and forming. SSAB Domex 340LA has consistent properties that facilitate today’s fast production methods.

Size range

SSAB Domex 340LA is available in thicknesses of 0.40-3.00 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 801)
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 2)
340 – 420 410 – 510 21 0,0

Mechanical properties are checked in the transverse direction.
Bending properties in both the longitudinal and transverse directions.

1) If the thickness is less than or equal to 0.7 mm, the minimum elongation value is reduced by 2 units.

2) t = sheet thickness.

Chemical composition (bucket sample)

C
(Max. % )		 SI
(Max. % )		 MN
(Max. % )		 P
(Max. % )		 S
(Max. % )		 AL
(Min. % )		 NB+TI
(Max. % )
0,10 0,040 1,00 0,030 0,025 0,015 0,10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance with EN 10131. Tighter tolerances are available on request.

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety precautions must be taken when bending, welding, cutting, grinding or other work with products.

SSAB Domex® 350LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 350LA is a high-strength, low-alloy steel designed for general pressing, bending and forming applications. SSAB Domex 350LA has consistent properties that facilitate today’s fast production methods.

Size range

SSAB Domex 350LA is available in thicknesses of 0.45-3.00 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 801)
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 2)
350 – 440 410 – 530 22 0,0

Mechanical properties are checked in the transverse direction.
Bending properties in both the longitudinal and transverse directions.

1) If the thickness is less than or equal to 0.7 mm, the minimum elongation value is reduced by 2 units.

2) t = sheet thickness.

Chemical composition (bucket sample)

C
(Max. % )		 SI
(Max. % )		 MN
(Max. % )		 P
(Max. % )		 S
(Max. % )		 AL
(Min. % )		 NB+TI
(Max. % )
0,10 0,040 0,90 0,030 0,025 0,015 0,10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance with EN 10131. Tighter tolerances are available on request.

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety precautions must be taken when bending, welding, cutting, grinding or other work with products.

SSAB Domex® 380LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 380LA is a high-strength, low-alloy steel designed for general pressing, bending and forming applications. SSAB Domex 380LA has consistent properties that facilitate today’s fast production methods.

Size range

SSAB Domex 380LA is available in thicknesses of 0.45-3.00 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 801)
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 2)
380 – 480 440 – 560 19 0,25
Mechanical properties are checked in the transverse direction.

Bending properties in both the longitudinal and transverse directions.

1) If the thickness is less than or equal to 0.7 mm, the minimum elongation value is reduced by 2 units.

2) t = sheet thickness.

Chemical composition (bucket sample)

C
(Max. % )		 SI
(Max. % )		 MN
(Max. % )		 P
(Max. % )		 S
(Max. % )		 AL
(Min. % )		 NB+TI
(Max. % )
0,10 0,50 1.20 0,030 0,025 0,015 0,10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance with EN 10131. Tighter tolerances are available on request.

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety precautions must be taken when bending, welding, cutting, grinding or other work with products.

SSAB Domex® 420LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 420LA is a high-strength, low-alloy steel designed for general pressing, bending and forming applications. SSAB Domex 420LA has consistent properties that facilitate today’s fast manufacturing methods.

Size range

SSAB Domex 420LA is available in thicknesses of 0.50-3.00 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 801)
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 2)
420 – 520 470 – 590 17 0,25

Mechanical properties are checked in the transverse direction.
Bending properties in both the longitudinal and transverse directions.

1) If the thickness is less than or equal to 0.7 mm, the minimum elongation value is reduced by 2 units.

2) t = sheet thickness.

Chemical composition (bucket sample)

C
(max. % )		 SI
(max. % )		 MN
(max. % )		 P
(max. % )		 S
(max. % )		 AL
(min. % )		 NB+TI
(max. % )
0,10 0,50 1.40 0,030 0,025 0,015 0,10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance with EN 10131. Tighter tolerances are available on request.

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety precautions must be taken when bending, welding, cutting, grinding or other work with products.

SSAB Domex® 460LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 460LA is a high-strength, low-alloy steel designed for general pressing, bending and forming applications. SSAB Domex 460LA has consistent properties that facilitate today’s fast manufacturing methods.

Size range

SSAB Domex 460LA is available in thicknesses of 0.50-1.60 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 801)
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 2)
460 – 580 510 – 660 13 0,5

Mechanical properties are checked in the transverse direction.
Bending properties in both the longitudinal and transverse directions.

1) If the thickness is less than or equal to 0.7 mm and exceeds 0.5 mm, the minimum elongation value is reduced by 2 units. For a thickness less than or equal to 0.5 mm, the minimum value is reduced by 4 units.

2) t = sheet thickness.

Chemical composition (bucket sample)

C
(Max. % )		 SI
(Max. % )		 MN
(Max. % )		 P
(Max. % )		 S
(Max. % )		 AL
(Min. % )		 NB+TI
(Max. % )
0,10 0,60 1.50 0,030 0,025 0,015 0,10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance with EN 10131. Tighter tolerances are available on request.

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety precautions must be taken when bending, welding, cutting, grinding or other work with products.

SSAB Domex® 500LA

Go to order or inquire

Specifications

Version ENG

General description of products

SSAB Domex 500LA is a high-strength, low-alloy steel designed for general pressing, bending and forming applications. SSAB Domex 500LA has consistent properties that facilitate today’s fast production methods.

Size range

SSAB Domex 500LA is available in thicknesses of 0.50-3.00 mm and widths up to 1500 mm in coils, slit coils and cut to length up to 8.5 meters.

Mechanical properties

LIQUID LIMIT R EL
(MPa )		 BREAKING STRENGTH R M
(MPa )		 EXTENSION A 801)
(MIN .%)		 MIN. INTERNAL BEND RADIUS FOR 90° BEND
(xt ) 2)
500 – 620 570 – 710 14 0,5

Mechanical properties are checked in the transverse direction.
Bending properties in both the longitudinal and transverse directions.

1) If the thickness is less than or equal to 0.7 mm, the minimum elongation value is reduced by 2 units.

2) t = sheet thickness.

2) Size A 5 refers to a thickness of 3.00 mm.

Chemical composition (bucket sample)

C
(Max. % )		 SI
(Max. % )		 MN
(Max. % )		 P
(Max. % )		 S
(Max. % )		 AL
(Min. % )		 NB+TI
(Max. % )
0,10 0,60 1,80 0,030 0,025 0,015 0,10

Tolerances

SSAB Domex LA products are supplied with thickness, width and length tolerances in accordance with EN 10131. Tighter tolerances are available on request.

Manufacturing and other recommendations

For manufacturing information, see SSAB brochures at www.ssab.com or contact technical support.

Appropriate safety precautions must be taken when bending, welding, cutting, grinding or other work with products.